LightWedge Paperback Book Light (Translucent Chocolate) Review

Average Reviews:

(More customer reviews)I bought the paperback size LightWedge because I have the hardcover size already and love it.The light distribution on the paperback size unit I received was not the same as the hardcover size.On the paperback size unit the light made "ripples" across the surface, like a drop of water does, making night reading impossible.There were light rings alternating with dark rings across the entire reading surface eminating from the lightsource.I'm not sure if I received a defective unit, but I returned it and will go to a local bookstore and "test" another one before purchasing again.

Click Here to see more reviews about: LightWedge Paperback Book Light (Translucent Chocolate)

Product Description:
A revolutionary new book light for nighttime reading. Patented LightWedge® technology directs light only on the page you are reading, without bothering someone sleeping next to you. The smaller LightWedge Paperback is designed specifically for mass-market paperbacks. Whether reading in bed, reading on a plane, or reading in a car, the LightWedge book light is the perfect accessory for all readers and an ideal gift for travelers.

Get 13% OFF

Want to read more honest consumer review about LightWedge Paperback Book Light (Translucent Chocolate) now ?

American Lighting 018-0005 Rope Lighting Kit with Mounting Clips, Clear, 30-Foot Review

Average Reviews:

(More customer reviews)After reviewing several distributors of 50ft rope lighting, this was what I wanted at a good price.The wiring is parallel, so one failed lamp does not black out the downstream lamps.(In fact, it survived one poorly aimed hammer blow with only 1 failed lamp.) The light is incandescent warm, not bothersome bright, but enough for accent lighting and navigation. We mounted it up on a trellis, where it is plenty of light for the dining table below (but I'd surround all 4 sides of the table).I looked at LCD lighting, but finally decided that it was too expensive.

Click Here to see more reviews about: American Lighting 018-0005 Rope Lighting Kit with Mounting Clips, Clear, 30-Foot

Product Description:
This flexible rope lighting can be used anywhere you need decorative lighting. It's ideal for cove or cabinet lighting, illuminating handrails, toe kick areas in the bath or kitchen, under a counter and more. 1 inch bulb spacing with a bulb life of 25,000 hours and an output of 3 watts per foot. Each bulb is only .25 watts. Rope sections may be connected to a maximum run distance of 200 feet. Molded female/male connectors. Includes hardware mounting clips and screws. 30 foot length of rope light. 5 foot power cord.

Get 20% OFF

Want to read more honest consumer review about American Lighting 018-0005 Rope Lighting Kit with Mounting Clips, Clear, 30-Foot now ?

Neiko Heavy Duty 5-Piece E-Clip Remover & Installer Set (4492) - SAE Review

Average Reviews:

(More customer reviews)My respect for Neiko tools continues to grow.And the recent addition of their E-clip removal/installation tool to my tool box has only furthered my respect for the company and the tools which they produce.

If you are looking for an E-clip tool, you probably know there are very few on the market.I actually purchased this one made by Neiko because of my great experience with some of Neiko's other tools (sockets, etc.).

Their E-clip tool is well made and functions nicely as far as inserting and removing the blades into the handle.The blades are made from very solid, heavy gauge metal (using my digital caliper, I found each blade to be .080" thick, which is also known as 2mm thick :-)The blades have a nice black oxide type coating.One side is designed to cradle the E-clip in a little grove so you can insert it into its slot on an axle, etc.The other end has sort of a double foot affair that allows you to press the E-clip off without mangling it.On the red handle, which is made from nice, sturdy plastic, there is a little spring action metal button.You press down on that and it allows you to insert or remove the blade.The center circle you see in the blade is just for design.The smaller round notches at either end are where the blade(s) actually lock into place using the button.

Each blade is marked.The numbers are E-9, E-8, E-7, E-6.These may relate to E-clip sizes, but I am not sure.Basically each size is slightly smaller than the previous, which gives you a good range to select from.This tool appears to be designed more for larger E-clips, so I don't think it will work for very, very tiny E-clips.However, with smaller E-clips, you usually don't really need any sort of tool anyway.

In my case, I bought this specific tool in order to install and remove an E-clip on my Stihl 441 Magnum chainsaw.Stihl uses a thick metric E-clip to hold the clutch assembly onto the end of the crankshaft.The problem is that it sort of sits down in a milled out area in a washer that retains the drive sprocket.I'm sure that works well to keep the drive sprocket on while you are bucking up trees, but it makes removing the E-clip almost impossible.Anyone who has serviced their 441 (or other) Stihl chainsaw knows what I'm talking about :-)Before buying this tool, the removal of that E-clip on my chain saw pretty much would destroy the E-clip.In fact, I have a bag of the Stihl E-clips, because I found it pretty much impossible to remove the E-clip from the crankshaft without messing it up.

I'm happy to report, however, that Neiko's E-clip removal tool now makes taking off and installing the E-clip on the Stihl 441 a breeze.Well, maybe not a breeze per se, but at least I can remove it without bending the E-clip and having to throw it away every time.So if you happen to be looking at this tool because you need to remove the E-clip on your Stihl chainsaw, then I can tell you that you have certainly come to the right place; it's worth every penny!

A+ has to be given to Neiko for their E-clip tool.It's a fine addition to any tool box and an outstanding value for the money.It's heavy duty, well thought out and very well made.I'm very happy with my purchase and it's made servicing the chainsaw much easier for sure.Thanks Neiko!

UPDATE:I've added some user photos, in order to better show how the ends look and how they work as far as inserting and removing the E-clips.Hopefully the photos (and review here) will help a bit when it comes to deciding if this tool is right for you and/or if it will work for whatever application you may be using it for.

Click Here to see more reviews about: Neiko Heavy Duty 5-Piece E-Clip Remover and Installer Set (4492) - SAE

Product Description:
Heavy duty Neiko e-clip remover and installer set.Comes with one handle and 4 blades - sizes: 1/4, 9/32, 5/16 and 3/8-inch.Easy to use, safely remove and install e-clips without damage.One end of the blade is for installthe e-clip, the other end is for removing.

Get 58% OFF

Want to read more honest consumer review about Neiko Heavy Duty 5-Piece E-Clip Remover and Installer Set (4492) - SAE now ?